1. Apr 13, 2016  Understanding Signals and Slot in Qt is not very difficult. Signals and slots are the basic foundation of Qt C GUI Application. In this QT tutorial we will learn signal and slots tutorial.
2. This allows the method to be a Qt slot, which means that it can be found by Qt Designer (and other C components) via Qt's meta-object system. Defining the Widget's Plugin Interface. Before the widget can be used in Qt Designer, we need to prepare another class that describes our custom widget and tells Qt Designer how to instantiate it.

In this example, we simply extend the Custom Widget Plugin example and its custom widget (based on the Analog Clock example), by introducing the concept of signals and slots.

The World Time Clock Plugin example consists of two classes: WorldTimeClock is a custom clock widget with hour and minute hands that is automatically updated every few seconds. WorldTimeClockPlugin exposes the WorldTimeClock class to Qt Designer.

The World Time Clock Plugin example consists of two classes:

• WorldTimeClock is a custom clock widget with hour and minute hands that is automatically updated every few seconds.
• WorldTimeClockPlugin exposes the WorldTimeClock class to Qt Designer.

First we will take a look at the WorldTimeClock class which extends the Custom Widget Plugin example's AnalogClock class by providing a signal and a slot. Then we will take a quick look at the WorldTimeClockPlugin class, but this class is in most parts identical to the Custom Widget Plugin example's implementation.

Finally we take a look at the plugin's project file. The project file for custom widget plugins needs some additional information to ensure that they will work within Qt Designer. This is also covered in the Custom Widget Plugin example, but due to its importance (custom widget plugins rely on components supplied with Qt Designer which must be specified in the project file that we use) we will repeat it here.

WorldTimeClock Class

The WorldTimeClock class inherits QWidget, and is a custom clock widget with hour and minute hands that is automatically updated every few seconds. What makes this example different from the Custom Widget Plugin example, is the introduction of the signal and slot in the custom widget class:

Note the use of the QDESIGNER_WIDGET_EXPORT macro. This is needed to ensure that Qt Designer can create instances of the widget on some platforms, but it is a good idea to use it on all platforms.

We declare the setTimeZone() slot with an associated timeZoneOffset variable, and we declare an updated() signal which takes the current time as argument and is emitted whenever the widget is repainted.

In Qt Designer's workspace we can then, for example, connect the WorldTimeClock widget's updated() signal to a QTimeEdit's setTime() slot using Qt Designer's mode for editing signal and slots.

We can also connect a QSpinBox's valueChanged() signal to the WorldTimeClock's setTimeZone() slot.

Qt Signal Slot Queue

WorldTimeClockPlugin Class

The WorldTimeClockPlugin class exposes the WorldTimeClock class to Qt Designer. Its definition is equivalent to the Custom Widget Plugin example's plugin class which is explained in detail. The only part of the class definition that is specific to this particular custom widget is the class name:

The plugin class provides Qt Designer with basic information about our plugin, such as its class name and its include file. Furthermore it knows how to create instances of the WorldTimeClockPlugin widget. WorldTimeClockPlugin also defines the initialize() function which is called after the plugin is loaded into Qt Designer. The function's QDesignerFormEditorInterface parameter provides the plugin with a gateway to all of Qt Designer's API's.

The WorldTimeClockPlugin class inherits from both QObject and QDesignerCustomWidgetInterface. It is important to remember, when using multiple inheritance, to ensure that all the interfaces (i.e. the classes that doesn't inherit Q_OBJECT) are made known to the meta object system using the Q_INTERFACES() macro. This enables Qt Designer to use qobject_cast() to query for supported interfaces using nothing but a QObject pointer.

The implementation of the WorldTimeClockPlugin is also equivalent to the plugin interface implementation in the Custom Widget Plugin example (only the class name and the implementation of QDesignerCustomWidgetInterface::domXml() differ). The main thing to remember is to use the Q_EXPORT_PLUGIN2() macro to export the WorldTimeClockPlugin class for use with Qt Designer:

Without this macro, there is no way for Qt Designer to use the widget.

The Project File: worldtimeclockplugin.pro

The project file for custom widget plugins needs some additional information to ensure that they will work as expected within Qt Designer:

The TEMPLATE variable's value make qmake create the custom widget as a library. The CONFIG variable contains two values, designer and plugin:

• designer: Since custom widgets plugins rely on components supplied with Qt Designer, this value ensures that our plugin links against Qt Designer's library (libQtDesigner.so).
• plugin: We also need to ensure that qmake considers the custom widget a plugin library.

When Qt is configured to build in both debug and release modes, Qt Designer will be built in release mode. When this occurs, it is necessary to ensure that plugins are also built in release mode. For that reason you might have to add a release value to your CONFIG variable. Otherwise, if a plugin is built in a mode that is incompatible with Qt Designer, it won't be loaded and installed.

The header and source files for the widget are declared in the usual way, and in addition we provide an implementation of the plugin interface so that Qt Designer can use the custom widget.

It is important to ensure that the plugin is installed in a location that is searched by Qt Designer. We do this by specifying a target path for the project and adding it to the list of items to install:

The custom widget is created as a library, and will be installed alongside the other Qt Designer plugins when the project is installed (using make install or an equivalent installation procedure). Later, we will ensure that it is recognized as a plugin by Qt Designer by using the Q_EXPORT_PLUGIN2() macro to export the relevant widget information.

Note that if you want the plugins to appear in a Visual Studio integration, the plugins must be built in release mode and their libraries must be copied into the plugin directory in the install path of the integration (for an example, see C:/program files/trolltech as/visual studio integration/plugins).

Qt Signal Slot Parameter

For more information about plugins, see the How to Create Qt Plugins document.

Files:

© 2016 The Qt Company Ltd. Documentation contributions included herein are the copyrights of their respective owners. The documentation provided herein is licensed under the terms of the GNU Free Documentation License version 1.3 as published by the Free Software Foundation. Qt and respective logos are trademarks of The Qt Company Ltd. in Finland and/or other countries worldwide. All other trademarks are property of their respective owners.

Home | All Classes | Main Classes | Annotated | Grouped Classes | Functions

Signals and slots are used for communication between objects. Thesignal/slot mechanism is a central feature of Qt and probably thepart that differs most from other toolkits.

In GUI programming we often want a change in one widget to be notifiedto another widget. More generally, we want objects of any kind to beable to communicate with one another. For example if we were parsingan XML file we might want to notify a list view that we're using torepresent the XML file's structure whenever we encounter a new tag.

Older toolkits achieve this kind of communication using callbacks. Acallback is a pointer to a function, so if you want a processingfunction to notify you about some event you pass a pointer to anotherfunction (the callback) to the processing function. The processingfunction then calls the callback when appropriate. Callbacks have twofundamental flaws. Firstly they are not type safe. We can never becertain that the processing function will call the callback with thecorrect arguments. Secondly the callback is strongly coupled to theprocessing function since the processing function must know whichcallback to call.

An abstract view of some signals and slots connections

In Qt we have an alternative to the callback technique. We use signalsand slots. A signal is emitted when a particular event occurs. Qt'swidgets have many pre-defined signals, but we can always subclass toadd our own. A slot is a function that is called in reponse to aparticular signal. Qt's widgets have many pre-defined slots, but it iscommon practice to add your own slots so that you can handle thesignals that you are interested in.

Qt Signal Slot Thread

The signals and slots mechanism is type safe: the signature of asignal must match the signature of the receiving slot. (In fact a slotmay have a shorter signature than the signal it receives because itcan ignore extra arguments.) Since the signatures are compatible, thecompiler can help us detect type mismatches. Signals and slots areloosely coupled: a class which emits a signal neither knows nor careswhich slots receive the signal. Qt's signals and slots mechanismensures that if you connect a signal to a slot, the slot will becalled with the signal's parameters at the right time. Signals andslots can take any number of arguments of any type. They arecompletely typesafe: no more callback core dumps!

All classes that inherit from QObject or one of its subclasses(e.g. QWidget) can contain signals and slots. Signals are emitted byobjects when they change their state in a way that may be interestingto the outside world. This is all the object does to communicate. Itdoes not know or care whether anything is receiving the signals itemits. This is true information encapsulation, and ensures that theobject can be used as a software component.

An example of signals and slots connections

Slots can be used for receiving signals, but they are also normalmember functions. Just as an object does not know if anything receivesits signals, a slot does not know if it has any signals connected toit. This ensures that truly independent components can be created withQt.

You can connect as many signals as you want to a single slot, and asignal can be connected to as many slots as you desire. It is evenpossible to connect a signal directly to another signal. (This willemit the second signal immediately whenever the first is emitted.)

Together, signals and slots make up a powerful component programmingmechanism.

A Small Example

A minimal C++ class declaration might read:

Qt Signal Slot Example

A small Qt class might read:

This class has the same internal state, and public methods to access thestate, but in addition it has support for component programming usingsignals and slots: this class can tell the outside world that its statehas changed by emitting a signal, valueChanged(), and it hasa slot which other objects can send signals to.

All classes that contain signals or slots must mention Q_OBJECT intheir declaration.

Slots are implemented by the application programmer.Here is a possible implementation of Foo::setValue():

The line emit valueChanged(v) emits the signalvalueChanged from the object. As you can see, you emit asignal by using emit signal(arguments).

Here is one way to connect two of these objects together:

Calling a.setValue(79) will make a emit a valueChanged()signal, which b will receive in its setValue() slot,i.e. b.setValue(79) is called. b will then, in turn,emit the same valueChanged() signal, but since no slot has beenconnected to b's valueChanged() signal, nothing happens (thesignal is ignored).

Note that the setValue() function sets the value and emitsthe signal only if v != val. This prevents infinite loopingin the case of cyclic connections (e.g. if b.valueChanged()were connected to a.setValue()).

A signal is emitted for every connection you make, so if youduplicate a connection, two signals will be emitted. You can alwaysbreak a connection using QObject::disconnect().

This example illustrates that objects can work together without knowingabout each other, as long as there is someone around to set up aconnection between them initially.

The preprocessor changes or removes the signals, slots andemit keywords so that the compiler is presented with standard C++.

Run the moc on class definitions that containsignals or slots. This produces a C++ source file which should be compiledand linked with the other object files for the application. If you useqmake, the makefile rules toautomatically invoke the moc will be added toyour makefile for you.

Signals

Signals are emitted by an object when its internal state has changedin some way that might be interesting to the object's client or owner.Only the class that defines a signal and its subclasses can emit thesignal.

A list box, for example, emits both clicked() andcurrentChanged() signals. Most objects will probably only beinterested in currentChanged() which gives the current list itemwhether the user clicked it or used the arrow keys to move to it. Butsome objects may only want to know which item was clicked. If thesignal is interesting to two different objects you just connect thesignal to slots in both objects.

Qt Plugin Interface Signal Slot Machine

When a signal is emitted, the slots connected to it are executedimmediately, just like a normal function call. The signal/slotmechanism is totally independent of any GUI event loop. Theemit will return when all slots have returned.

If several slots are connected to one signal, the slots will beexecuted one after the other, in an arbitrary order, when the signalis emitted.

Signals And Slots Qt

Signals are automatically generated by the mocand must not be implemented in the .cpp file. They can never havereturn types (i.e. use void).

A note about arguments. Our experience shows that signals and slotsare more reusable if they do not use special types. If QScrollBar::valueChanged() were to use a special type such as thehypothetical QRangeControl::Range, it could only be connected toslots designed specifically for QRangeControl. Something as simple asthe program in Tutorial #1 part 5would be impossible.

Slots

A slot is called when a signal connected to it is emitted. Slots arenormal C++ functions and can be called normally; their only specialfeature is that signals can be connected to them. A slot's argumentscannot have default values, and, like signals, it is rarely wise touse your own custom types for slot arguments.

Since slots are normal member functions with just a little extraspice, they have access rights like ordinary member functions. Aslot's access right determines who can connect to it:

A public slots section contains slots that anyone can connectsignals to. This is very useful for component programming: you createobjects that know nothing about each other, connect their signals andslots so that information is passed correctly, and, like a modelrailway, turn it on and leave it running.

A protected slots section contains slots that this class and itssubclasses may connect signals to. This is intended for slots that arepart of the class's implementation rather than its interface to therest of the world.

A private slots section contains slots that only the class itselfmay connect signals to. This is intended for very tightly connectedclasses, where even subclasses aren't trusted to get the connectionsright.

You can also define slots to be virtual, which we have found quiteuseful in practice.

The signals and slots mechanism is efficient, but not quite as fast as'real' callbacks. Signals and slots are slightly slower because of theincreased flexibility they provide, although the difference for realapplications is insignificant. In general, emitting a signal that isconnected to some slots, is approximately ten times slower thancalling the receivers directly, with non-virtual function calls. Thisis the overhead required to locate the connection object, to safelyiterate over all connections (i.e. checking that subsequent receivershave not been destroyed during the emission) and to marshall anyparameters in a generic fashion. While ten non-virtual function callsmay sound like a lot, it's much less overhead than any 'new' or'delete' operation, for example. As soon as you perform a string,vector or list operation that behind the scene requires 'new' or'delete', the signals and slots overhead is only responsible for avery small proportion of the complete function call costs. The same istrue whenever you do a system call in a slot; or indirectly call morethan ten functions. On an i586-500, you can emit around 2,000,000signals per second connected to one receiver, or around 1,200,000 persecond connected to two receivers. The simplicity and flexibility ofthe signals and slots mechanism is well worth the overhead, which yourusers won't even notice.

Meta Object Information

The meta object compiler (moc) parses the classdeclaration in a C++ file and generates C++ code that initializes themeta object. The meta object contains the names of all the signal andslot members, as well as pointers to these functions. (For moreinformation on Qt's Meta Object System, see Whydoesn't Qt use templates for signals and slots?.)

The meta object contains additional information such as the object's class name. You can also check if an objectinherits a specific class, for example:

A Real Example

Qt Plugin Install

Here is a simple commented example (code fragments from qlcdnumber.h ).

Qt Plugin Interface Signal Slot Downloads

QLCDNumber inherits QObject, which has most of the signal/slotknowledge, via QFrame and QWidget, and #include's the relevantdeclarations.

Q_OBJECT is expanded by the preprocessor to declare several memberfunctions that are implemented by the moc; if you get compiler errorsalong the lines of 'virtual function QButton::className not defined'you have probably forgotten to run the moc or toinclude the moc output in the link command.

It's not obviously relevant to the moc, but if you inherit QWidget youalmost certainly want to have the parent and namearguments in your constructors, and pass them to the parentconstructor.

Some destructors and member functions are omitted here; the mocignores member functions.

QLCDNumber emits a signal when it is asked to show an impossiblevalue.

If you don't care about overflow, or you know that overflow cannotoccur, you can ignore the overflow() signal, i.e. don't connect it toany slot.

If, on the other hand, you want to call two different error functionswhen the number overflows, simply connect the signal to two differentslots. Qt will call both (in arbitrary order).

A slot is a receiving function, used to get information about statechanges in other widgets. QLCDNumber uses it, as the code aboveindicates, to set the displayed number. Since display() is partof the class's interface with the rest of the program, the slot ispublic.

Several of the example programs connect the newValue() signal of aQScrollBar to the display() slot, so the LCD number continuously showsthe value of the scroll bar.

Note that display() is overloaded; Qt will select the appropriate versionwhen you connect a signal to the slot. With callbacks, you'd have to findfive different names and keep track of the types yourself.

Some irrelevant member functions have been omitted from thisexample.